Forum Title: PVC Sill Nosing (can't find it...!!!)
[couldn't find a 'Window' category at the Exterior board...sorry]hello again... about 3 or 4 years ago, I purchased a 12' length of Caradco PVC Sill Nosing from Home Depot. This is a cutoff I had left over; & saved: I am now continuing w/ my exterior renovations; & find myself in need of another 12' length. Since that time, Caradco was gobbled up by Jeld-Wen...& they can't seem to help at Home Depot (despite the fact that I provided the original SKU & Part #'s). I can't seem to make any headway w/ Jeld-Wen either; & was wondering if anyone here knows where this can be obtained (I am in mid-Jersey), or who to contact at Jeld-Wen to find it (couldn't find anything relative to 'parts & accessories' on their site). Sure would appreciate some help on this one...I've got all my windows rehabbed save for a set of 4 D-H's mulled together on my South elevation; & I need a 12' length of that exact profile Sill Nosing to finish up. Thanks a million,mark4manBordentown, NJ
Category: Windows & Doors Post By: CLAUDE TERRY (Killeen, TX), 01/05/2019

How did he construct walls without subflooring? You will have to cut off a little of the jambs to allow for proper installation. Now as far as your carpet you will need to determine how much space you will have left after the doors are installed to see if it will clear the carpet in complete swing, or if you will have to trim the door off. You don't have to trim the jamb for carpeting. If and when you cut your doors off, naturally cut off the bottom, mark the line squarely across the door and score the line with a razor knife. Then, using a good plywood blade, cut on the waste side of your scored line. This will keep you from splintering on the door side. Good luck with it!

- EILEEN BYRD (Jersey City, NJ), 02/06/2019

Most of the millworks houses I use have the extruded sill, even though they make their money in wood. They like them better and they tend to weather better and don't rot. Just check in the yellow pages for millworks. I am sure you can find one that carries them.

- REBECCA WRIGHT (Baytown, TX), 02/25/2019

If you can find a retailer that sells Azek in your area, they have a PVC sill nose profile.

- HERBERT FRANKLIN (Palmdale, CA), 02/22/2019

For Homeowners & Businesses - Advice, Tips, Help, Guidance

requestaquote Get Free Quotes callnow 888-506-9527